সব পণ্য
-
আলফ্রেড ***আমরা পণ্য পেয়েছি, সবকিছু ঠিকঠাক হয়েছে। নিখুঁত প্যাকেজিং, ভাল পণ্যের গুণমান, ভাল দাম - আমরা সন্তুষ্ট। -
মে ***পণ্যের গুণমান খুব ভাল, আমার প্রত্যাশার বাইরে, প্রকৃত ব্যবহার সম্পূর্ণরূপে আমার চাহিদা পূরণ, আমরা আবার কিনতে হবে। -
ম্যাথু ***আমি জয় থেকে কম প্রসারণশীল সংকর ধাতু কিনেছিলাম, তিনি একজন খুবই দায়িত্বশীল মহিলা, হুওনার পণ্যের মান বেশ ভালো।
Type J Iron-Constantan Thermocouple Strip 0.10×1.8mm Ultra-Thin for Precision Low & Medium Temp Sensing with Micro Forming
| উৎপত্তি স্থল | সাংহাই |
|---|---|
| পরিচিতিমুলক নাম | Huona |
| সাক্ষ্যদান | ISO 9001 |
| মডেল নম্বার | টাইপ জে |
| ন্যূনতম চাহিদার পরিমাণ | 5 কেজি |
| মূল্য | আলোচনা সাপেক্ষে |
| প্যাকেজিং বিবরণ | শক্ত কাগজ/কাঠের কেস |
| ডেলিভারি সময় | 5-21 দিন |
| পরিশোধের শর্ত | এল/সি, টি/টি, ওয়েস্টার্ন ইউনিয়ন |
| যোগানের ক্ষমতা | প্রতি মাসে 500 টন |
পণ্যের বিবরণ
| থার্মোকল টাইপ | টাইপ J (উচ্চ বিশুদ্ধতা আয়রন পজিটিভ + কনস্ট্যান্টান কিউ-নি নেগেটিভ ম্যাচিং পেয়ার) | স্ট্যান্ডার্ড মাত্রা | বেধ: 0.04-0.38 মিমি; প্রস্থ: 0.7-7.5 মিমি |
|---|---|---|---|
| কাস্টম আকার পরিসীমা | বেধ: 0.04-0.38 মিমি; প্রস্থ: 0.7-7.5 মিমি | সারফেস ট্রিটমেন্ট | লো-স্ট্রেস ফুল সফট অ্যানিলড, মিরর পালিশ, ফাইন এজ ট্রিমড, কোনো প্রতিরক্ষামূলক ফিল্ম নেই |
| অপারেটিং তাপমাত্রা | -40°C ~ 700°C (শুষ্ক লো-অক্সিডেশন লাইট-ডিউটি ইন্ডাস্ট্রিয়াল এনভায়রনমেন্ট) | খাদ রচনা | ইতিবাচক: পরিশোধিত উচ্চ-বিশুদ্ধতা আয়রন; নেতিবাচক: কপার-নিকেল কনস্ট্যান্টান অ্যালয় |
| পরিমাপ নির্ভুলতা | IEC গ্রেড 2 স্ট্যান্ডার্ড থার্মোইলেকট্রিক সহনশীলতা | প্রক্রিয়াকরণ কর্মক্ষমতা | অতি-নরম কম অবশিষ্ট স্ট্রেস, মাইক্রো রেডিআই-এ নমনযোগ্য, নির্ভুল মাইক্রো গঠনের পরে ক্র্যাক-মুক্ত |
| বিশেষভাবে তুলে ধরা | Ultra-Thin Type J Thermocouple Strip,Low & Medium Temp Sensing Thermocouple Tape,Precision Micro Forming Flat Thermocouple Alloy |
||
পণ্যের বর্ণনা
Product Overview
This ultra-thin Type J Iron-Constantan flat thermocouple strip developed by Huona is lightweight precision alloy material targeted at compact low-to-medium temperature measurement components. It adopts fully matched pure iron positive and copper-nickel constantan negative alloy pair, manufactured through micro-thin precision rolling and low-residual-stress full soft annealing technology. The strip features ultra-slim uniform cross-section, high-gloss flawless metallic surface, excellent pliability and stable thermoelectric signal output within its rated temperature scope. Neatly wound on solid white single industrial spools without outer plastic film wrapping as shown in the picture, it delivers convenient unwinding and processing, specially made for mini patch temperature sensors, built-in micro thermal detection inserts and compact light-duty heating equipment temperature monitoring parts that prioritize slim size and stable cost performance.
Core Specifications
Product Name: Type J Iron-Constantan Ultra-Thin Light-Duty Flat Thermocouple Strip
Conductor Material: Positive (High Purity Iron) / Negative (Constantan Cu-Ni Thermocouple Alloy)
Processing Technology: Micro-thin precision cold rolling + low-stress full soft annealing + fine edge trimming treatment
Standard Specification: 0.10mm Thickness × 1.8mm Width
Customizable Size Range: Thickness 0.04–0.38mm, Width 0.7–7.5mm
Surface Condition: High-gloss mirror silver metallic finish, burr-free smooth edges, no surface protective film
Thermoelectric Performance: Precisely batch-calibrated to IEC Type J international standards, consistent thermal voltage output under variable light cyclic temperature changes
Operating Temperature Range: -40°C ~ 700°C (continuous stable service under dry low-oxidation industrial working environments)
Standards Compliance: IEC 60584-1, GB/T 4989, RoHS 2.0, REACH non-hazardous material certification
Key Differentiating Advantages
1. Purified Iron-Constantan Alloy Matching for Low-Medium Temp Linear Signals
This ultra-thin flat strip adopts low-impurity refined iron and standard constantan raw materials, with strict single-to-pair thermoelectric matching for every production batch. It presents smooth linear thermoelectric response from sub-zero up to 700°C, effectively cutting measurement deviation for miniature sensing assemblies. The mature low-cost alloy formula maintains steady performance between batches to lower overall raw material expenditure for mini-sensor mass production.
2. Mild Anti-Oxidation Performance for Low & Medium Dry Thermal Scenarios
Refined grain microstructure enhances the alloy’s anti-rust and anti-oxidation capability under temperatures below 700°C dry air conditions. It slows down surface oxide film accumulation during frequent mild heating-cooling cycles, avoiding gradual signal attenuation and extending the service life of small built-in temperature probes for light industrial and electronic heating devices.
3. Ultra-Soft Low-Stress Texture for Miniature Precision Machining
Full soft annealing completely eliminates internal rolling tension, granting the strip ultra-high flexibility to support ultra-small radius winding, micro stamping and ultra-fine cutting without cracking, rebounding or fracturing. Its slim flat profile fits narrow internal gaps of compact equipment and closely fits curved small surfaces to capture sensitive, accurate temperature feedback in limited assembly space.
4. Micron-Level Uniform Dimension & Bare Spool Easy Processing Design
Advanced micro-slitting and constant-pressure rolling equipment achieves ultra-tight width and thickness tolerance across the whole spool length. The mirror polished smooth surface reduces thermal contact resistance during temperature collection, and bare spool design without wrapping film saves pre-processing stripping steps, improving production efficiency for sensor manufacturers. Smooth trimmed edges eliminate risk of scratching thin insulation layers during encapsulation.
5. Ideal Cost-Efficiency for Light-Duty Miniature Thermal Monitoring
Compared with high-temperature thermocouple alloy grades, this Iron-Constantan ultra-thin tape balances reliable sensing precision and economical raw material cost. It retains stable mechanical and thermoelectric properties through repeated light temperature fluctuation cycles, acting as an optimal core raw material for portable test instruments, small heating modules and compact automated equipment temperature tracking parts.
Technical Specifications Table
| Attribute | Typical Specification |
|---|---|
| Thermocouple Type | Type J (High Purity Iron Positive + Constantan Cu-Ni Negative Matching Pair) |
| Standard Dimension | 0.10mm (Thickness) × 1.8mm (Width) |
| Custom Size Range | Thickness: 0.04–0.38mm; Width: 0.7–7.5mm |
| Surface Treatment | Low-Stress Full Soft Annealed, Mirror Polished, Fine Edge Trimmed, No Protective Film |
| Operating Temperature | -40°C ~ 700°C (Dry Low-Oxidation Light-Duty Industrial Environments) |
| Alloy Composition | Positive: Refined High-Purity Iron; Negative: Copper-Nickel Constantan Alloy |
| Measurement Accuracy | IEC Grade 2 Standard Thermoelectric Tolerance |
| Processing Performance | Ultra-soft low residual stress, bendable at micro radii, crack-free after precision micro forming |
Supply & Packaging Standard
Supply Form: Continuous ultra-thin flat strip evenly and tightly wound on sturdy single white industrial plastic spools, bare spool delivery without wrapping film; standard full-length reels and custom small fixed-length cutting orders are both acceptable
Packaging: Individual dust-proof sealed outer bag for each bare spool with shock-absorbing buffer padding, suitable for lightweight cross-border logistics and clean dry long-term warehouse storage
MOQ: 1 single bare spool for prototype small-batch trial manufacturing; large-volume bulk supply for miniature sensor factories, electronic component producers and compact laboratory testing equipment suppliers
Customization Service: Customizable strip thickness, narrow width range, single spool winding weight, annealing softness and dimensional precision tolerance to meet miniature sensor assembly and light-duty temperature testing personalized demands
Typical Application Scope
Miniature Flat Patch Thermocouple Production: Core raw material for ultra-thin surface contact Type J temperature probes applied to compact electronic heating assemblies.
Portable Laboratory Mini Thermal Test Gear: Low-cost high-precision temperature sensing inserts for desktop small thermal analysis instruments and mini test chambers.
Small Electronic Heating Core Monitoring: Built-in temperature detection components for tiny heating modules, semiconductor low-temperature thermal test fixtures.
Light Industry Compact Drying Equipment: Real-time temperature tracking for desktop baking machines, small textile drying equipment and miniature plastic forming heating devices.
Narrow-Gap Built-In Thermal Detection: Custom slim temperature measurement parts for confined internal cavities of automation micro equipment and curved small-surface contact monitoring.
প্রস্তাবিত পণ্য
